TYFON is equipped with three winches.
First winch is installed in the front bumper with the chassis fitted winchbed. Winch is WARN Series 6 hydraulic winch and it has 2.720kg pulling force.
Winch has 25m / 8mm steel rope. Rope speed from layers 4 – 1 with 57 l/min flow is 16,2 –> 9,8 m/min.
Primary rear winch:
Primary rear winch or main winch is for daily use in all applications. It is installed on the top of the lifting boom and it is equipped for two speed operation. Winch is WARN Industrial series XL20 hydraulic winch and it has 9.072kg pulling force.
Winch has 40m / 12mm steel rope. Rope speed from layers 5 – 1 with 57 l/min flow is 14,3 –> 8,3 m/min in High Speed, and 7,2 – 4,1 m/min in Low Speed.
Pulling force with the High Speed is approximately half of the Low Speed pulling force.
Secondary (BIG) rear winch:
Secondary rear winch is for heavy use. It is also installed on the top of the lifting boom behinde the primary winch (when looking from rear). Winch is WARN Industrial series XL30 hydraulic winch and it has 13.608kg pulling force.
It is equipped with high strength fiber rope, Dyneema 14mm with 22ton MBL (maximum breaking load). This rope is extremely lightweight and 15 times stronger than steel on a weight-for-weight basis.
Rope speed from layers 5 – 1 with 57l/min flow is 7.0 – 4.0 m/min. This secondary strong winch is one speed only.
Hydraulic inverter 230V / 15.2A (3500w)
TYFON is equipped with powerful hydraulic inverter. With its 3500w power, it is possible to use powerful electric tools. Even welding machine if situation demands so.
Hydraulic compressor 450l/min / 8 bar
In the toolbox there is hydraulic air compressor generating 450l / min air on 8 bar pressure. Several air reservours are used to store pressurized air and outlets are installed on both sides of the vechile.